Nokia C3 MIC, mouthpiece microphone Solution ~ Tic Droid

This solution may works to fix a damaged Nokia C3 Microphone that result to "No Voice Sound can be heard on the other device when making a call.
If ever encountered this try to update the device flash firmware first before proceeding to hardware troubleshooting.
If the flash firmware is successfully been done and nothing happens: The solution below will you which particular circuit components on Nokia C3 PCB board that needs to be check and replace if found damaged.

Nokia C3 Microphone Failure Hardware Repair Solution

From microphone's audio signal which is the "voice being picked up" is being feeds to the AD-DA processor chip (JUNO) and there are corresponding components that also connected to it. Like, the filter coils, capacitors and resistors.
You may need to check this components first and then replaced if found damaged.
If all of these components seems all perfectly working, you may then proceed to replace the microphone module.
There is an instances that you may need to rework the JUNO IC after ensuring that of those corresponding components including the microphone module seems all working but still the problem exist.

Thanks for reading my news about Nokia C3 MIC, mouthpiece microphone Solution at my blog Tic Droid if you want too share this article, please put the resource, and if you think this article is very usefully dont forget to bookmark this site with CTRL + D on your keyboard to web browser.