The I9505XXUFNC5 official Android 4.4.2 KitKat firmware is now available to Galaxy S4 LTE (GT-I9505) users. For those unable to get the KitKat update OTA, the following guide will walk you through installing it manually.
As always, DroidReport assumes no liability for the firmware installation. Proceed with caution.
Before Getting Started
Before you get started, ensure that your Galaxy S4 LTE is the GT-I9505 model.
As always, you want to backup your device and charge it to at least 80 percent. Finally, enable USB Debugging mode by navigating to Settings -> Developer Options.
Installing Android KitKat 4.4.2 Official Build (XXUFNC5) On Samsung Galaxy S4 LTE
2) Put your Galaxy S4 in download mode by holding the Volume Down, Home and Power buttons. When a warning prompt appears, press Volume Up.
3) Unzip Odin v3.09. Right click on Odin v3.09.exe and run the application as an administrator.
4) Using your USB cable, connect your Galaxy S4 to your computer. You should see one of the ID:COM fields turn blue in Odin. If this does not occur, reinstall your computer’s USB drivers.
5) Within Odin, press AP and select the .md5 file.
6) Make sure Re-Partition is deselected, then check Auto Reboot and F. Reset Time.
7) Press start, which will begin the installation process. Do nothing until this completes.
8) Your Galaxy S4 will reboot and you’ll officially be running Android 4.4.2 KitKat. Kudos.
Thanks for reading my news about How To Install Android 4.4.2 KitKat (XXUFNC5) On Samsung Galaxy S4 LTE at my blog Tic Droid if you want too share this article, please put the resource, and if you think this article is very usefully dont forget to bookmark this site with CTRL + D on your keyboard to web browser.